This pump is comparable hydraulic design to any conventional centrifugal pump. Standard dimension process pushes with mechanical Seal/ Glandular packing arrangement covering all of the chemical sectors. These pumps give you unusual protection against rust & abrasive. We suggest a wide range of Polypropylene Chemical Process Pumps. Polypropylene pumps are a horizontal only last part suction consistent back pull out centrifugal pumps. Polypropylene Chemical Process Pumps series anti-corrosive pumps are supplied with mechanical seal or gland packing arrangement covering 85% of the requirements.
Features Of PolyPropylene Process Pump
- The volute chamber is one piece, grave , joint less design affected from Poly-Propylene Process pumps a chemically still thermoplastic by the use of an absolute moulded process.
- The entire wet-end parts are in solid moulded manufacture to with stand corrosion and erosion.
- The impeller are semi-open type Hydraulically impartial by back vanes, used in our all pumps to suit both obvious & impure fluids.
- Reserve portion of pumps are made from Poly-Propylene so no deterioration problem can pump leakage.
- The bearing bracket made from heavy-duty grade cast covered with anti corrosive paint.
- Reliable fitting of impeller on the shaft by straight thread.
- Centrifugal quiet, vibration free.
- The absolute pump-rotating element can be reserved towards the motor end without troubling the suction or delivery pipeline, due to back drag out design. The motor stay set to base plate. The pump rotating part can easily be dismantled into its section. After rebuild no time consuming Re-Alignment is required.
- You will find utmost dimensional inter-changeability in the design of Pump.
- This Pumps require least spare parts and save you significant maintenance costs in the long run.
Application Polypropylene Chemical Process Pump
- PHOSPHORIC ACID PLANTS : H3PO4, H2SO4, HF and their mixtures with or without solid (gypsum) up to 40% conc.
- GAS WASHING PLANTS : Scrubbed liquids containing CL2, BR2, F2, I2, SO2, SO3, CO2, NH3 Gases etc. with solids replace hastalloy.
- RAYON PLANTS : Spin bath solution (H2SO4, ZNSO4, NaSO4, etc.)
- CAUSTIC SODA PLANTS : Chlorinated brine, conc. HCL, Dilute H2SO4 etc.
- WATER TREATMENT
- EFFLUENT TREATMENT
- ELECTRO PLATING
- PICKLING IN STEEL ROLLING MILLS
- FILTER PRESS FOR DYES
- DESCALING
- PAPER AND FERTILIZER PLANTS